Since I bought an Acer notebook to use Linux again (I sold my mac, I have a post about it but in portuguese) I started to compile my own kernel.
The reasons for the decision:
I have a hardware that works better with the newer kernels. I really want to understand the linux kernel better. As Judas Priest sings on Painkiller song: “I’m living on the eeeeeedge”. LOL
How to proceed
There are some steps to follow when compiling a new kernel for your Linux box:
Clone the kernel repository with git, I made it using the Github url:
git clone git://github.com/torvalds/linux.git
Copy your .config file to the linux folder. If your distro have the “Enable config.gz” flag enabled (most distros have it) you can use the generated config as a base for your new compiled version:
zcat /proc/config.gz > linux/.config
Now that you have a functional config file (it was running on the stock kernel right? ￼ ), just cd do the kernel folder and run make:
cd linux make
This process take about 40 minutes to finish on my i7, with 4GB of RAM and SSD, running with -j4, to use all the 4 cores. Obviously the time to finish will depend on what it will need to compile (defined on the .config file) and the processing power of your machine. You can improve this compiling time but I’ll talk more about it later.
You can use the compiling time to prepare the mkinitcpio file for the installation. On my archlinux box I have created a file named git.preset on /etc/mkinitcpio.d/ directory with the following content:
ALL_config="/etc/mkinitcpio.conf" ALL_kver="/boot/vmlinuz-git" PRESETS=('default') default_image="/boot/initramfs-git.img"
After that you’ll need to change your bootloader conf a bit. I’m using grub (not grub2 yet) which makes the setup really easy! Just change your /boot/grub/menu.lst and add something like this:
title Git Kernel root (hd0,0) kernel /vmlinuz-git root=/dev/sda2 ro quiet acpi_backlight=vendor init=/bin/systemd initrd /initramfs-git.img
PS: I’m using systemd to init and I need to define the acpi_backlight to make my hardware to work properly, but probably you’ll not need these parameters. If you’re using grub, you may find useful to copy the other configuration of the same file and change what needs to me changed (title and initrd).
When the compilation ends and your mkinitcpio file is ready you can continue the process by generating the modules for your kernel:
sudo make modules_install
This command will create a folder with the compiled modules on /lib/modules. After that, just copy the generated image file to the boot directory:
sudo cp arch/x86_64/boot/bzImage /boot/vmlinuz-git
And create the initial randisk environment for your preset using mkinitcpio:
sudo mkinitcpio -p git
DONE! Your kernel is compiled and ready to boot! Just restart you computer and choose the new item on the boot menu! ￼
So, your new kernel is running perfectly (I hope so…It’s a release candidate, we never know what may happen :P), but you’ll want to go deeply into the kernel options and improve the compiling time and the disk space for the kernel, so lets tune the .config file to be specific to our hardware!
WARNING: It will take a lot of time to get a good configuration and you’ll not receive so much benefit from it, but it will be fun. I promise.
So, let’s get started! Go to the linux kernel directory and run:
The fun part starts here because you’ll be seeing an awesome curses screen with a lot of menus and submenus about a lot of things that you never heard about, but no despair! Some things you already know, like your processor for example! If you have an Intel processor is safe to remove all the AMD related configurations from the .config file and probably add some intel ones as built in (and vice versa).
Some things you need to have in mind when starting to buil your own kernel configuration is that you really need to know what hardware you’re running on your machine. This is really interesting because we don’t care so much about some pieces of hardware nowadays, and you’ll need to care about it if you want to build your own configuration because you can’t remove these modules.
A good way to start is boot with the stock configuration, run lsmod and backup this into a file. These modules should not be removed because they are making your machine to work as it is working now, but some of them should be marked as builtin into the kernel. I saw some recommendations to not include the WIFI driver as builtin to avoid some pre-load problems, so I’m keeping my WIFI driver as a module.
Some cool (but not so useful) parts can be found on “General Setup”:
Default hostname – This configuration will be specific, so name your machine! Local version – Append an string to the kernel release I can’t help you so much on this journey because each hardware has its own dependencies and corner cases, so you will need to compile and see how it’s going to fit your needs.
If you’re planning to customize your configuration file I really recommend to use a versioning control (like git) to keep tracking of your file because you’ll need to revert some changes sometimes (believe me) and git will help you to make this process less painful.
We are weird people (me for writting this and you to be interesting in doing the same thing) but this process will help you to understand some interesting things about your operating system and feel that there is no magic happening there, this is just code that you can change if you want. I was planning to end this article with “there is no advantage on making this at all” but after remembering all the process I think that I learned a lot, so it is worth it.
Old comments by: Darkside | Not available anymore. :(